View 2STD166508_4787184.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2STD1665
Low voltage fast-switching NPN power transistor
Features

Very low collector to emitter saturation volatage High current gain characteristic Fast-switching speed Through-hole IPAK (TO-251) power package in tube (suffix"-1") Surface mounting DPAK (TO-252) power package in tape & reel (suffix"T4")
1 3 2
3 1
IPAK TO251 ( Suffix "-1" )
DPAK TO252 ( Suffix "T4" )
Applications

Ccfl drivers Voltage regulators Relay drivers High efficiency low voltage switching applications
Figure 1.
Internal schematic diagram
Description
The device is manufactured in NPN Planar Technology by using a "Base Island" layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage.
Table 1.
Device summary
Marking D1665 D1665 Package DPAK IPAK Packing Tape & reel Tube
Order code 2STD1665T4 2STD1665-1
March 2008
Rev 2
1/11
www.st.com 11
2STD1665
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 2.2 Electrical characteristics (curves) ........................... 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2/11
2STD1665
1
Electrical ratings
Table 2.
Symbol VCBO VCEO VEBO IC ICM IB Ptot Tstg TJ
Absolute maximum rating
Parameter Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Total dissipation at Tc = 25 C Storage temperature Max. operating junction temperature Value 150 65 7 6 20 1 15 -65 to 150 150 Unit V V V A A A W C C
Table 3.
Symbol Rthj-amb
Thermal data
Parameter Thermal resistance junction-case __max Value 8.33 Unit C/W
3/11
Electrical characteristics
2STD1665
2
Electrical characteristics
(Tcase = 25 C unless otherwise specified) Table 4.
Symbol ICBO
Electrical characteristics
Parameter Test conditions Min. Typ. Max. Unit 50 1 10 nA A nA
Collector cut-off current VCB = 120 V (IE = 0) VCB = 120 V Emitter cut-off current (IC = 0) VEB = 7 V
T C = 100 C
IEBO
Collector-base V(BR)CBO (1) breakdown voltage (IE = 0) Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) Emitter-base V(BR)EBO (1) breakdown voltage (IC = 0)
IC = 100 A
150
V
IC = 10 mA
65
V
IE = 100 A IC = 100 mA IB = 5 mA IB = 50 mA IB = 50 mA IB = 150 mA IB = 300 mA IB = 200 mA VCE = 1 V VCE = 1 V VCE = 1 V VCE = 1 V VCE = 1 V f = 1 MHz
7
V
50 50 100 260 230 1 0.85 150 150 90 30 320 310 175 65 45 350 120 200 600 380 1.15 1
mV mV mV mV mV V V
VCE(sat)
(1)
Collector-emitter saturation voltage
IC = 1 A IC = 2 A IC = 6 A IC = 6 A
VBE(sat) (1) VBE(on) (1)
Base-emitter saturation IC = 4 A voltage Base-emitter On voltage IC = 4 A IC = 10 mA
hFE
DC current gain
IC = 2 A IC = 5 A IC = 10 A
CCBO
Collector-base capacitance Resistive load
VCB = 10 V
pF
tON ts tf
1.
Turn-on time Storage time Fall time
IC = 3 A IB1 = -IB2 = 0.3 A
VCC = 10 V
90 800 90
ns ns ns
Pulsed duration = 300 s, duty cycle 1.5%.
4/11
2STD1665
2.1
Electrical characteristics (curves)
Figure 2. Output characteristics Figure 3. DC current gain
Figure 4.
Collector-emitter saturation voltage
Figure 5.
Collector-emitter saturation voltage
Figure 6.
Base-emitter saturation voltage
Figure 7.
Base-emitter on voltage
5/11
Electrical characteristics
2STD1665
Figure 8.
Switching times resistive load
Figure 9.
Switching times resistive load
Figure 10. Capacitance
2.2
Test circuit
Figure 11. Resistive load switching and RBSOA test circuit
1) Fast electronic switching 2) Non-inductive resisitor
6/11
2STD1665
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
7/11
Package mechanical data
2STD1665
TO-252 (DPAK) mechanical data
DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20
0068772_G
8/11
2STD1665
TO-251 (IPAK) mechanical data
DIM. A A1 b b2 b4 B5 c c2 D E e e1 H L L1 L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 1.00 0.45 0.48 6.00 6.40 2.28 4.60 5.20 0.3 0.60 0.60 6.20 6.60 mm. min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40
0068771_H
9/11
Revision history
2STD1665
4
Revision history
Table 5.
Date 08-May-2006 27-Mar-2008
Document revision history
Revision 1 2 Initial release New graphics Changes
10/11
2STD1665
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11

▲Up To Search▲

Price & Availability of 2STD166508

	To Download 2STD166508 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .